|Reference Standards||Standards the instrument complies with: ISO 6916-2; ISO 293; ISO 2393; ASTM D3182; ISO 6916-1; UNI 5572;|
|Max useable platen surface 270 mm x 270 mm||Max closure force 25 Tons||Max platen stroke 200 mm||Temperatures
Up to 250°C (300°C optional).
Maximimum error at the centre of the platen <0,5°C.
Mean difference in the 200x200mm central area of the platen from the center <0,5°C.
|Cooling System by Water Circuit (Option) Cooling of high efficiency test plates with controlled cooling gradient (between 0 and -50 °C/min)||Cooling System by Compressed Air circuit (Option) The device is designed to accelerate the preparation of the press between moldings at different temperatures (Cooling speed 3°C/min)||Closure force Control (option) Press configuration for continuous control of the closing force between 10 and 250 kN (between 1000 and 25000 kg) with maximum adjustment error 1 kN. Closure force can be set for each step of the molding cycle.|
|Press control device|
|PLC with Touch Screen Display The 10" color display permits to manually operate the machine, view the status of all the devices and sensors installed and prepare moulding cycles.||Setup of Moulding cycles Storage of 40 molding cycles. Each cycle can include up to 30 operations which include: platen displacement, temperature set closure force set (option).||Operating Status Indicator Light: Press ready, Moulding Cycle active, Press setting test temperature|
• Safety Pushbutton.
• Pneumatic safety protection Door with safety switch
|Labelling CE Labelling|
|Calibration Report Calibration report with traceability to primary standards in conformity with the Calibration requirements specified in ISO 2393 standard||Calibrated parameters
The certificate includes the calibration of:
- temperature of the platens. The measure is performed in 9 different points of the platens and at 3 different temperatures (140°C, 170°C, 200°C).
- Closure force (with Pressure control option)
|Platen temperature control
- Electrical heating.
- Independent temperature control of the plates by means of PID controllers
|Compressed Air supply Pressure: 6 bar. Compressed air regulation unit integrated into the instrument||Power supply 380 VAC ±10%,50 Hz ±3, 8 kW,three-phase -Other on request||Electrical power 8 kW||Instrument dimensions (Width x Depth x Height) 872 x 1123 x 1943 mm||Weight 620 Kg|
|Cooling System allows the temperature reduction of the platens at a controlled speed (up to -50 ° C / min). The cooling circuit can be connected to a demineralised water supply source or to a chiller.||Cooling liquid supply
The water supplied to the Press must be demineralized.
Water pressure between 4 and 6 bar
Nominal flow rate: 0.3 L/sec at 25°C (standard water supply)