De Mattia Flexon Check - Environmental Chamber
Dynamic tester for the execution of fatigue tests at controlled temperature in compliance with ISO 132, 6943, ASTM D 430-B, DIN 53 522 -1/2/3


Standards the instrument complies with:   
ASTM D813;   ASTM D430-B;   ISO 132;   ISO 6943;    

Overview 
The instrument is built according to International Standards about fatigue, which describe test methods for the determination of the resistance of vulcanized rubbers under repeated deformations. This instrument permits to perform:
- Flex cracking/crack growth test
- Tension fatigue test.

Temperature Control 
The sample holding system is located in a Environmental chamber which permits to set the temperature between -40°C and 200 °C.
The environmental chamber is fitted with inspection window and internal led lighting which permit to inspect the sample without opening the chamber.

Instrument Regulation 
According to the test method and the type of sample, the test cycle can be set by the user:
- the deformation frequency can be set between 60 and 300 rpm.
- the stroke can be set between 0 and 60mm
- the distance of the grips can be set (up to 100 mm)
- the number of cycles before automatic stop can be set
- the test temperature can be set between -40°C and 200°C.



Sample holders 
The sample holder permits to test 12 samples simultaneusly.
The exclusive movement system with both sample holders moving in opposite directions ensures extremely low levels of noise and vibrations.


Control device 
The instrument is controlled using a touch screen display which permits to set the oscillation frequency, the number of cycles and the test temperature.

Safety devices 
Safety protection door fitted with safety switch. Digital Motor controller with torque overload control.
CE labelling



Standard Calibration service for a Flexon Check 
The calibration is performed with reference to the requirements of ISO 132 standard.
The service includes:
• Ordinary maintenance of the instrument
• Calibration of the oscillation speed.
• Calibration of the dimension of the templates.
• Calibration of the temperature inside the environmental chamber at 4 temperatures (for flexometers with environmental Chamber)
• Issue and e-mail shipment of the Calibration Certificate with traceability to primary standards.


Mould for De Mattia Flexure test 
Mould for De Mattia dynamic tester according to ISO 132, ASTM D 430-method B, DIN 53 522 standards.

Piercing tool 
The piercing tool allows to realize the standard notch to carry out crack-growth tests.


Speed adjustment 
from 30 to 300 Cycles/min - 0.5 to 5 Hz 
Run adjustment 
Between 0 and 60 mm 
Distance of the grips 
Maximum 100 mm 
Maximum force in traction 
600 N (at 1 Hz oscillation speed) 
Data displayed 
Number of oscillations, test Temperature 
Sample holder 
12 samples can be tested at the same time 
Test temperature (without optional refrigerator) 
From room temperature to 200°C (1°C resolution). 
Test temperature (with optional refrigerator) 
From -40°C to 200°C (1°C resolution). 
Instrument Dimensions 
(Width x Depth x Height) 960 x 900 x 1750 mm 
Thermal Chamber Internal dimensions 
(Width x Depth x Height) 240  x 230 x 600 mm 
Weight 
300 Kg (optional refrigeration unit: 40 Kg) 
Air Flow 
Regulable by the user 
Noise level 
< 50 dB 
Power supply 
220 VAC ±10%, 50 Hz ±3, 10 A -single phase - 110 VAC ±10%, 60 Hz ±3 on request 


Electrical Power 
3 kW 


Gibitre Instruments
Via dell'industria, 18
Bergamo (Italy)
te. +39 035 461146
www.gibitre.it
info@gibitre.it

© Gibitre Instruments
Follow us on
 
De Mattia Flexon Check - Environmental Chamber
Dynamic tester for the execution of fatigue tests at controlled temperature in compliance with ISO 132, 6943, ASTM D 430-B, DIN 53 522 -1/2/3



Standards the instrument complies with:   ASTM D813;   ASTM D430-B;   ISO 132;   ISO 6943;    
Overview 
The instrument is built according to International Standards about fatigue, which describe test methods for the determination of the resistance of vulcanized rubbers under repeated deformations. This instrument permits to perform:
- Flex cracking/crack growth test
- Tension fatigue test.
Temperature Control 
The sample holding system is located in a Environmental chamber which permits to set the temperature between -40°C and 200 °C.
The environmental chamber is fitted with inspection window and internal led lighting which permit to inspect the sample without opening the chamber.
Instrument Regulation 
According to the test method and the type of sample, the test cycle can be set by the user:
- the deformation frequency can be set between 60 and 300 rpm.
- the stroke can be set between 0 and 60mm
- the distance of the grips can be set (up to 100 mm)
- the number of cycles before automatic stop can be set
- the test temperature can be set between -40°C and 200°C.
Sample holders 
The sample holder permits to test 12 samples simultaneusly.
The exclusive movement system with both sample holders moving in opposite directions ensures extremely low levels of noise and vibrations.

Control device 
The instrument is controlled using a touch screen display which permits to set the oscillation frequency, the number of cycles and the test temperature.

Safety devices 
Safety protection door fitted with safety switch. Digital Motor controller with torque overload control.
CE labelling
Standard Calibration service for a Flexon Check 
The calibration is performed with reference to the requirements of ISO 132 standard.
The service includes:
• Ordinary maintenance of the instrument
• Calibration of the oscillation speed.
• Calibration of the dimension of the templates.
• Calibration of the temperature inside the environmental chamber at 4 temperatures (for flexometers with environmental Chamber)
• Issue and e-mail shipment of the Calibration Certificate with traceability to primary standards.

Gibitre calibration service

Mould for De Mattia Flexure test 
Mould for De Mattia dynamic tester according to ISO 132, ASTM D 430-method B, DIN 53 522 standards.
Piercing tool 
The piercing tool allows to realize the standard notch to carry out crack-growth tests.

Standards the instrument complies with:  
ASTM D813; ASTM D430-B; ISO 132; ISO 6943;  
Speed adjustment 
from 30 to 300 Cycles/min - 0.5 to 5 Hz 
Run adjustment 
Between 0 and 60 mm 
Distance of the grips 
Maximum 100 mm 
Maximum force in traction 
600 N (at 1 Hz oscillation speed) 
Data displayed 
Number of oscillations, test Temperature 
Sample holder 
12 samples can be tested at the same time 
Test temperature (without optional refrigerator) 
From room temperature to 200°C (1°C resolution). 
Test temperature (with optional refrigerator) 
From -40°C to 200°C (1°C resolution). 
Instrument Dimensions 
(Width x Depth x Height) 960 x 900 x 1750 mm 
Thermal Chamber Internal dimensions 
(Width x Depth x Height) 240  x 230 x 600 mm 
Weight 
300 Kg (optional refrigeration unit: 40 Kg) 
Air Flow 
Regulable by the user 
Noise level 
< 50 dB 
Power supply 
220 VAC ±10%, 50 Hz ±3, 10 A -single phase - 110 VAC ±10%, 60 Hz ±3 on request 
Electrical Power 
3 kW 
Printable version

Instrument latest software release
Faq
Related pages
Ask for quotation

a guided way
to ask
for a quotation
Mail

info@gibitre.it
The good old e-mail
ready for every season
Phone

+39 035 460146
Your calls are welcome
monday to friday
03 pm to 01 am
in your local time zone
Local agent


See the whole list

In your country
in your language
at your service
Cookie policy
Questo sito utilizza i cookies (dati permanenti registrati sul tuo PC) per:
- ricordare la lingua scelta
- ricordare i prodotti preferiti
- suggerire prodotti in funzione delle pagine più visitate
- mantenere aperta la sessione (nella sole aree riservata)

Cliccando su "accetta" autorizzate l'uso dei cookies.

Accetto / Accept

This site uses cookies (permanent data on your PC) for:
- remembering the choosed language
- remembering your favorite products
- suggest other products based upon the most viewed pages
- keep the navigation session open (only in the reserved area)

By ckicking on "accept" you authorize the use of cookies.