De Mattia Flexon Check - Standard
Dynamic tester for the execution of flexon resistance tests in compliance with ISO 132, 6943, ASTM D 430-B, DIN 53 522 -1/2/3


Standards the instrument complies with:   
ASTM D813;   ASTM D430-B;   ISO 132;   ISO 6943;    

Overview 
Dynamic tester for the execution of fatigue tests in compliance with ISO 132, 6943, ASTM D 430-B, DIN 53 522 1/2/3
The instrument is built according to International Standards about fatigue, which describe test methods for the determination of the resistance of vulcanized rubbers under repeated deformations.
This instrument permits to perform flex cracking/crack growth test and Tension fatigue test.


Instrument Regulation 
According to the test method and the type of sample, the test cycle can be set by the user:
- the frequency can be set between 60 and 300 rpm
- the stroke can be set between 0 and 60 mm
- the distance of the grips can be set (up to 100 mm)
- the number of cycles before automatic stop can be set
- up to 16 samples can be tested at the same time.


Construction 
The exclusive movement system with both sample holders moving in opposite directions extremely low levels of noise and vibrations.
The instrument has a solid aluminium and stainless steel structure that ensures long duration and repeatable results.



Control device 
The instrument is controlled using a touch screen display

Standard Calibration service for a Flexon Check 
The calibration is performed with reference to the requirements of ISO 132 standard.
The service includes:
• Ordinary maintenance of the instrument
• Calibration of the oscillation speed.
• Calibration of the dimension of the templates.
• Calibration of the temperature inside the environmental chamber at 4 temperatures (for flexometers with environmental Chamber)
• Issue and e-mail shipment of the Calibration Certificate with traceability to primary standards.


Safety Devices 
Safety protection doors with safety switch
Motor controller with torque overload control
CE labelling



Mould for De Mattia Flexure test 
Mould for De Mattia dynamic tester according to ISO 132, ASTM D 430-method B, DIN 53 522 standards.

Piercing tool 
The piercing tool allows to realize the standard notch to carry out crack-growth tests.


Speed adjustment 
from 60 to 300 Cycles/min - 1 to 5 Hz 
Run Adjustment 
Between 0 and 60 mm 
Distance of the clamps 
Max 100 mm 
Maximum force in traction 
600 N (at 1 Hz oscillation speed) 
Sample Holder 
16 samples can be tested at the same time 
Data displayed 
Set number of cycles, Cycles performed, oscillation Frequency 
Test piece holder dimensions 
Ø 200 X 400 mm 
Instrument Dimensions 
(Width x Depth x Height) 550 x 550 x 900 mm 
Weight 
80 Kg 
Power supply 
220 VAC ±10%,50 Hz ±3, 10 A, single phase, 1kW - - 110 VAC ±10%, 60 Hz ±3 on request 
Safety Devices 
Safety protection doors with safety switches
Safety Pushbutton
Motor controller with torque overload control
CE labelling 
Noise Level 
<50 dB 


Gibitre Instruments
Via dell'industria, 18
Bergamo (Italy)
te. +39 035 461146
www.gibitre.it
info@gibitre.it

© Gibitre Instruments
Follow us on
 
De Mattia Flexon Check - Standard
Dynamic tester for the execution of flexon resistance tests in compliance with ISO 132, 6943, ASTM D 430-B, DIN 53 522 -1/2/3



Standards the instrument complies with:   ASTM D813;   ASTM D430-B;   ISO 132;   ISO 6943;    
Overview 
Dynamic tester for the execution of fatigue tests in compliance with ISO 132, 6943, ASTM D 430-B, DIN 53 522 1/2/3
The instrument is built according to International Standards about fatigue, which describe test methods for the determination of the resistance of vulcanized rubbers under repeated deformations.
This instrument permits to perform flex cracking/crack growth test and Tension fatigue test.
Instrument Regulation 
According to the test method and the type of sample, the test cycle can be set by the user:
- the frequency can be set between 60 and 300 rpm
- the stroke can be set between 0 and 60 mm
- the distance of the grips can be set (up to 100 mm)
- the number of cycles before automatic stop can be set
- up to 16 samples can be tested at the same time.

Construction 
The exclusive movement system with both sample holders moving in opposite directions extremely low levels of noise and vibrations.
The instrument has a solid aluminium and stainless steel structure that ensures long duration and repeatable results.
Control device 
The instrument is controlled using a touch screen display
Standard Calibration service for a Flexon Check 
The calibration is performed with reference to the requirements of ISO 132 standard.
The service includes:
• Ordinary maintenance of the instrument
• Calibration of the oscillation speed.
• Calibration of the dimension of the templates.
• Calibration of the temperature inside the environmental chamber at 4 temperatures (for flexometers with environmental Chamber)
• Issue and e-mail shipment of the Calibration Certificate with traceability to primary standards.

Gibitre calibration service

Safety Devices 
Safety protection doors with safety switch
Motor controller with torque overload control
CE labelling
Mould for De Mattia Flexure test 
Mould for De Mattia dynamic tester according to ISO 132, ASTM D 430-method B, DIN 53 522 standards.
Piercing tool 
The piercing tool allows to realize the standard notch to carry out crack-growth tests.

Standards the instrument complies with:  
ASTM D813; ASTM D430-B; ISO 132; ISO 6943;  
Speed adjustment 
from 60 to 300 Cycles/min - 1 to 5 Hz 
Run Adjustment 
Between 0 and 60 mm 
Distance of the clamps 
Max 100 mm 
Maximum force in traction 
600 N (at 1 Hz oscillation speed) 
Sample Holder 
16 samples can be tested at the same time 
Data displayed 
Set number of cycles, Cycles performed, oscillation Frequency 
Test piece holder dimensions 
Ø 200 X 400 mm 
Instrument Dimensions 
(Width x Depth x Height) 550 x 550 x 900 mm 
Weight 
80 Kg 
Power supply 
220 VAC ±10%,50 Hz ±3, 10 A, single phase, 1kW - - 110 VAC ±10%, 60 Hz ±3 on request 
Safety Devices 
Safety protection doors with safety switches
Safety Pushbutton
Motor controller with torque overload control
CE labelling 
Noise Level 
<50 dB 
Printable version

Instrument latest software release
Faq
Related pages
Ask for quotation

a guided way
to ask
for a quotation
Mail

info@gibitre.it
The good old e-mail
ready for every season
Phone

+39 035 460146
Your calls are welcome
monday to friday
03 pm to 01 am
in your local time zone
Local agent


See the whole list

In your country
in your language
at your service
Cookie policy
Questo sito utilizza i cookies (dati permanenti registrati sul tuo PC) per:
- ricordare la lingua scelta
- ricordare i prodotti preferiti
- suggerire prodotti in funzione delle pagine più visitate
- mantenere aperta la sessione (nella sole aree riservata)

Cliccando su "accetta" autorizzate l'uso dei cookies.

Accetto / Accept

This site uses cookies (permanent data on your PC) for:
- remembering the choosed language
- remembering your favorite products
- suggest other products based upon the most viewed pages
- keep the navigation session open (only in the reserved area)

By ckicking on "accept" you authorize the use of cookies.