Compression Set - Constant Force
Instrument for the execution of Compression for tests under constant force


Standards the instrument complies with:   
ASTM D395-A;   FIAT 50410;   UNI 4913-2;    

Overview 
The device complies with ASTM D 395 Method A, UNI 4913-2, FIAT 50410 and equivalent standards.The device is fitted with a calibrated spring and a closure regulation system which permit to set the required force.

How to perform a test 
To perform a test:
1) Insert the sample in the test position
2) Set the required closure force.
3) Place the whole device in an oven at the set temperature and for the desired test time
4) Remove the device from the oven and mesure the permanent deformation using the procedure described in the standards


Accessories 
• Moulds for preparing samples in compliance with standards.
• Thickness meter for the measurment of the sample deformation




Surface Rugosity of the plates 
• The measurement of the surface roughness of the device is reported in the calibration report of the instrument and guarantees full compliance with the requirements of the standards.
• The Identification Code imprinted on the Plates guarantees the traceability of the measurements made.


Calibration of the Forces Applied 
The calibration of the force applied at all the instrument's adjustment points is carried out with reference to the primary instruments used.


Testing Configuration 
 
Applicable forces (N) 
130, 230, 360, 456, 530, 820, 1000, 1800, 1833, 2400 
Construction 
The device is made of chrome-plated steel 
Calibration 
 
Calibration 
Calibration Report conforming to ASTM D 395-A with traceability to primary standards 
Dimensions 
Ø 180 mm, H 460 mm 
Weight 
14 kg 


Gibitre Instruments
Via dell'industria, 18
Bergamo (Italy)
te. +39 035 461146
www.gibitre.it
info@gibitre.it

Copyright Gibitre Instruments
Instrument for the execution of Compression for tests under constant force

Compression Set - Constant Force

Get a Quotation
Standards
Standards the instrument complies with:
Automotive
NON-METALLIC MATERIAL TESTS - Elastomer compression set under constant load and constant deflectionFIAT 50410
Rubber & Elastomers
Elastomeri - Prove su vulcanizzati - Deformazione residua dopo compressione a forza imposta a temperature normali ed elevate UNI 4913-2Standard Test Methods for Rubber Property—Compression SetASTM D395-A
Instrument for the execution of Compression for tests under constant force
Overview 
The device complies with ASTM D 395 Method A, UNI 4913-2, FIAT 50410 and equivalent standards.The device is fitted with a calibrated spring and a closure regulation system which permit to set the required force.
How to perform a test 
To perform a test:
1) Insert the sample in the test position
2) Set the required closure force.
3) Place the whole device in an oven at the set temperature and for the desired test time
4) Remove the device from the oven and mesure the permanent deformation using the procedure described in the standards
Accessories 
• Moulds for preparing samples in compliance with standards.
• Thickness meter for the measurment of the sample deformation
 
Surface Rugosity of the plates 
• The measurement of the surface roughness of the device is reported in the calibration report of the instrument and guarantees full compliance with the requirements of the standards.
• The Identification Code imprinted on the Plates guarantees the traceability of the measurements made.
Calibration of the Forces Applied 
The calibration of the force applied at all the instrument's adjustment points is carried out with reference to the primary instruments used.
Technical specifications
Reference Standards
Standards the instrument complies with:  FIAT 50410; UNI 4913-2; ASTM D395-A;  
Testing Configuration
Applicable forces (N)  130, 230, 360, 456, 530, 820, 1000, 1800, 1833, 2400  Construction  The device is made of chrome-plated steel 
Calibration
Calibration  Calibration Report conforming to ASTM D 395-A with traceability to primary standards  Dimensions  Ø 180 mm, H 460 mm  Weight  14 kg 
Download
Product leaflet

General catalogue

Calibration certificate
example
Call to action
Ask for quotation
a guided way to ask
for a quotation
Mail
info@gibitre.it
The good old e-mail
ready for every season
Phone
+39 035 460146
Your calls are always welcome
monday to friday
Newsletter
Subscribe
Stay updated
with the last news
of your sector
Local agent
from: us
See the whole list

In your country
in your language
at your service
Welcome to the Gibitre Instruments web site
Please accept the Privacy Policy. Have a nice browse.
Benvenuti nel sito Gibitre Instruments
Per continuare accettate il trattamento dei dati.



Privacy policy
By accepting you agree that your data will be handled according to
Gibitre Instruments’s Privacy Notice on Personal Data Processing.

Gestione della Privacy
Accettando acconsentite al trattamento dei dati da parte di Gibitre Instruments srl
come descritto nell'Informativa sul trattamento dei dati personali.