introducing
Rebound Check
dbg


Rebound Check
Standards the instrument complies with:
  
Rubber & Elastomers
ASTM D7121ISO 4662 
 
Rebound Check
648
Instrument characteristics 
The instrument measures the resilience of elastomers with hardness ranging from 30 to 85 IRHD points.
The Resilience is the ratio between energy yield and energy applied in the impact between the instrumet's hammer and the specimen having dimensional characteristics defined by the standards.
This measure provides useful indications regarding the dynamic behavior of an elastomer.
The measurement is performed by determining the rebound angle of the hammer following the impact.
The instrument provides direct reading of the resilience value.
The results of 5 tests performed on the specimen, their mean and standard deviation are displayed.
Close
Close
Rebound Check
250
Instrument control 
The touch-screen display installed on the instrument permits to:
• Display the results of 5 tests made on the sample
• Calculate mean and standard deviation of the results
• Calibrate the angle reading of the instrument
• Export the data
Close
Close
 
Rebound Check
170
Sample Holder 
The sample holder is conforming to ISO 4662 and ASTM D 7121 standards. The application tool supplied with the instrument premits easy insertion and removal of the sample.
Close
Close
Rebound Check
65
Software for data import 
Gibitre_Serial Connection software for data storage and printout.
Close
Close
 
Rebound Check
551
Standard Calibration service for Rebound Tester 
Maintenance and Calibration service for your Rebound Tester.
The calibration is performed with reference to the requirements of ISO 4662 standard.
The service includes:
- Ordinaly maintenance of the instrument
- Testing of the friction: measure of the number of free oscillation of the striker before the stop.
- Calibration of the diameter of the striker.
- Calibration of the weight of the striker.
- Calibration of the length of the striker.
- Issue and e-mail shipment of the Calibration Certificate with traceability to primary standards.
Close
Close
Rebound Check
83
Mould for sample preparation 
Mould for preparing specimens in compliance with ISO 4662 and ASTM D 7121standards.
Close
Close
 
Rebound Check
441
Development and production 
The instrument is totally developed and produced in the plant of Gibitre Instruments in Italy.
All the mechanical parts are produced in the company workshop using modern CNC machines.
Components and sensors from well-known brands are selected in order to ensure the maximum reliability in the measures
Internal trained personnel takes care of all the production stages: assembly, start-up, calibration, packing, shipment and installation.
Close
Close