Datagest
SoftwareGibitre Software
PlatformSmart Test
IdentificationRheoCheck
SoftwareMooney
Check - SoftwareDensity
Check - SoftwareHardness
Check - SoftwareTensor
Check - SoftwareTR_Test -
SoftwareBrittleness
Check -
SoftwarePressCheck
SoftwareCompression
Set -
SoftwareCompany Connection
SoftwareGibitre
Software InstallerMaintenance and Calibration ServiceISO 17025 Accredited CalibrationRemote Assistance Service
Support request form
Italiano
English
Español
Français
Deutsch
Português
Polskie
Čeština
Magyar
Русский
Türk
中文
日本人
한국어
Arab
The Planetary Test Apparatus from Gibitre Instruments is designed to perform static tensile tests on rubber and thermoplastics. It is loaded into the test chamber via a motorized winch, which lifts it to allow for inspection of the specimens during exposure, making interim inspections convenient.
Why choose it:
- Up to 64 specimens simultaneously: ideal for material comparison and high-throughput quality control.
- Compliance with standards: static tensile exposure tests according to ISO 1431-1, ISO 2285, ASTM D518-A, and ASTM D1149 (as well as 412 and DIN 53 509-1), an essential requirement for those using measuring instruments compliant with international standards.
- Quick and precise setup: the integrated ruler allows for immediate setting of the required strain.
- Specimen flexibility: specimen holder for 2 specimens 25 mm wide or 4 specimens 10 mm wide, to accommodate various test geometries.
- Long stroke of the movable bracket (175 mm): useful for covering the elongation levels required by test procedures.
Motor-controlled grip holder with planetary effect conforming to ISO 1431-1 Standard.
Up to 16 grips for static exposure can be installed on the grip holder at the same time for contemporary test inside the Ozone Cabinet.
Up to 64 samples (with 10 mm width) can be tested at the same time with the device.
Grip for Tension Set and Static Exposure Test in traction conforming to ISO 1431-1, ISO 2285, ASTM D 518-A, ASTM 1149, ASTM 412, DIN 53 509-1 Standards.
The grip permits to fix two samples with 25 mm width or 4 samples with 10 mm width.
The ruler on the device permits the easy adjustment of the desired strain.
The total run of the moving grip is 175 mm.
The Planetary-Effect Device is inserted into the test chamber using the motorized winch.
The same winch allows you to lift the device to check the condition of the specimens.
The lifting winch is controlled by the interlocked safety device which inhibits its operation if the ozone concentration inside the chamber is above the safety limits (10 pphm)
