General
Access to the software with customer-defined passwords.
Three access levels with different access rights are available.
On line selectable usage language (available languages are English, Italian, French, Spanish, German, Russian, Portugherse and Chinese)
Automatic setting of the instrument according to customer defined test procedures.

Test Identification
Test identification can be inserted during the test (after the closure of the plates) to minimize the stop time between tests.
The tests are identified by inserting Product, Customer, Order code, Lot code and Batch number. When the test is stored, the software automatically adds Test Date, Test Time, Software User and test identification number.
The software permits to increase automatically the batch number without re-inserting test identification

Graph
Display of S' (elastic curve), S" (Viscous curve), S* (complex curve), TangDelta, Der_S' (Vulcanization speed curve), Upper plate temperature curve, Lower plate temperature curve
Storage of all test curves at the end of the test (excluding temperature curves)
The Elastic curves of the tests performed on the same product are displayed with different colours to permit immediate identification of corresponding results.
Graph functions are available (zoom, cursors, selection of the colours of the curves, scale set)

Results Calculation
Calculation of up to 20 customer defined test results for each test procedure (See the list of available calculation for a detailed description)
Calculation of statistic results of the test performed (max, min, average, Std. Dev., Cp, Cpk).
Unsatisfactory tests can be repeated or excluded form statistic calculation and test report

Tolerance Control
Tolerance limits for each product and for customer-defined results can be calculated from statistical analysis of stored results or inserted manually (see datagest software).
Both Graph and numerical tolerance limits can be displayed and printed (see image 1)
Check of conformity of test results with tolerance limits is automatically made at the end of the test.
Test start may be prevented if the temperature is not within set tolerance limits.