Gibitre - Grips for Tensile Tester

8-D15-00-000-0 - PNEUMATIC GRIPS (CLOSURE FORCE 2000 N)

Couple of pneumatically actuated vice grip with tightening closure regulation and maximum closure force 2000 N. The grips are provided with standard jaws. A range of optional cross cut, plain and rubber jaw faces are available.
Maximum sample width: 80 mm
Maximum sample thickness: 14 mm
Maximum closure force: 2000 N
Application: General purpose grips for tensile testing of rubber, plastics, textiles and other materials where self-tightening is required.

8-D15-21-000-0 - OPTIONAL JAWS FOR PNEUMATIC GRIPS 2000N

N° 4 jaw faces with rubber covering for pneumatic grips (2000 N closure force)

8-D15-23-000-0 - OPTIONAL JAWS FOR PNEUMATIC GRIPS 2000N

N° 4 jaw faces for pneumatic grips (2000 N closure force) with diamond serrated finishing

8-D15-22-000-0 - OPTIONAL JAWS FOR PNEUMATIC GRIPS 2000N

N° 4 jaw faces for pneumatic grips (2000 N closure force) with fine V-serrated finishing

8-DM5-00-000-0 - PNEUMATIC GRIPS (CLOSURE FORCE 600 N)

Couple of pneumatically actuated vice grip with tightening closure regulation and maximum closure force 600 N. The grips are provided with standard jaws. A range of optional cross cut, plain and rubber jaw faces are available.
Maximum sample width: 35 mm
Maximum sample thickness: 10 mm
Maximum closure force: 600 N
Application: General purpose grips for tensile testing of rubber, plastics, textiles and other materials where self-tightening is required.

8-DM5-10-000-0 - OPTION JAWS WITH FOR SMALL PNEUM. GRIPS

N° 4 rubber covered jaw faces for Pneumatic Grips with closure force 600 N

8-DM3-00-000-0 - PNEUMATIC SLIDING WEDGE GRIPS - 10 kN

Couple of pneumatically operated sliding wedge grips with tightening closure regulation and maximum closure force 10 kN. The grips are provided with standard jaws. Optional cross cut or plain jaw faces are available.
Maximum sample width: 32 mm
Maximum sample thickness: 9 mm
Maximum closure force: 10 kN
Application: tensile testing of plastics and composite materials where self-tightening is required.

8-D11-00-000-0 - BOLLARD GRIPS FOR WIRES WITH PNEUM.CLAMP

Couple of Bollard grip with pneumatic camp for metal wire, yarns and threads. The sample is wrapped around the bollard and the free end clamped firmly using a pneumatic clamp. Grip stresses in the specimen are distributed in the material in contact with the bollard circumference.
Diameter of the Bollard: 78 mm
Application: tensile testing of high resistance wire, yarns and threads

8-D29-00-000-0 - GRIPS FOR TRACTION TEST ON LITTLE HOSES

Pneumatic grip for traction test on small diameter rubber hoses. The grip is ideal for the testing of hoses with high elongation and low tear resistance.

8-DM1-00-000-0 - SELF TIGHTENING MANUAL GRIPS

Couple of Eccentric Roller Grips - 25 mm wide
General purpose self-tightening grips ideal for dumbbell and flat specimens. The roller operates using a basic cam jamming principle. The rollers have a fine serrated finish that helps to prevent slipping.
Maximum sample width: 30 mm.
Maximum sample thickness: 5 mm (0.2 in).
Capacity: 1 kN
Applications: Ideal for tensile testing sheet materials including polymers and rubber.

8-D32-00-000-0 - SELF TIGHTENING SLIDING WEDGE GRIPS

Couple of general purpose manually operated self-tightening sliding wedge grips. The grips are provided with serrated jaw faces.
Maximum sample width: 32 mm.
Maximum sample thickness 9 mm.
Maximum closure force: 10 kN
Application: tensile testing of plastics and composite materials where self-tightening is required.

8-D17-00-000-0 - MANUAL VICE ACTION GRIPS

Couple of manual operated vice action grips.
The jaws for the grips (not included ) must be selected among the available models.
Maximum sample width: 55 mm
Maximum sample thickness: 10 mm
Maximum closure force: 5 kN
Application: tensile test of rubber, leather, textiles.

8-D17-12-000-0 - JAWS FOR MANUAL GRIPS (V SERRATED)

N° 4 jaw faces for Manual linear grips (Fine V-serrated)

8-D17-11-000-0 - JAWS FOR MANUAL GRIPS (DIAMOND SERRATED)

N° 4 Jaw faces for Manual linear grips with Diamond serrated (crossed V-serrated) finishing.

8-D17-10-000-0 - JAWS FOR MANUAL GRIPS (WAVE-SHAPED)

N° 4 wave-shaped jaw faces for Manual linear grips

8-D35-00-000-0 - SELF-TIGHTENING BOLLARD GRIPS

Couple of self-tightening bollard grips.
The sample is mounted over the bollard and positioned between the bollard and the grip shank. The fine serrated finishing of the parts in contact with the sample helps to prevent slippage.
Maximum sample width: 30 mm
Maximum sample thickness: 10 mm
Capacity: 1 kN
Application: tensile testing of textile, rubber pipes, etc.

8-D10-00-000-0 - PLATENS FOR COMPRESSION TESTS

Couple of circular platens for compression tests with 120 mm diameter. The lower platen is fitted with ball joint to ensure parallelism between the planes during the test.

8-D20-00-000-0 - RECTANGULAR COMPRESSION PLATENS

Couple of rectangular platens for compression tests with dimensions 220x100 mm. The upper platen is fitted with articulated joint to ensure parallelism between the planes during the test.
Application: compression Tests on corrugated pipes according to EN 50086-2-4. Compression tests on foam and expanded products.

8-D21-00-000-0 - GRIPS FOR BENDING TEST

Grips for three points-bending-tests according to ISO 178 and ASTM D 790 standards. The lower grip permits to set the distance between the contact points.
Maximum distance of the contact points: 140 mm
Maximum sample width: 30 mm

8-D28-00-000-0 - GRIPS FOR TEXTILE BAND

Couple of grips for textile band traction test. Maximum sample width 180 mm.

8-DM8-0N-000-0 - ROTATING GRIPS FOR TEST OF ISO 37-A RING

Couple of rotating grips for the tensile testing of ISO 37-Type A Rings. A chain driven system permits to rotate the upper grip during the test according to the requirements of the standard.
Application: the grips permit can be used for the performance of tensile tests on rings according to ISO-37 type A or for the tensile testing of O-Rings according to ASTM D 1414.
The grips are ideal for the execution of tensile tests with thermal chamber because the measure of elongation does not require extensometers.
Note: Pulleys with non standard diameter for the testing of finished products can be optionally supplied.

8-DM8-0Q-000-0 - ROTATING GRIPS FOR TEST OF ISO 37-B RING

Couple of rotating grips for the tensile testing of ISO 37-Type B Rings. A chain driven system permits to rotate the upper grip during the test according to the requirements of the standard.
Application: the grips permit can be used for the performance of tensile tests on rings according to ISO-37 type B or for the tensile testing of O-Rings according to ASTM D 1414.
The grips are ideal for the execution of tensile tests with thermal chamber because the measure of elongation does not require extensometers.
Note: pulleys with non standard diameter for the testing of finished products can be optionally supplied.

8-D12-00-000-0 - GRIP FOR ISO 813 TEST (90° PEEL)

Grip for determination of adhesion to a rigid substrate (90° peel method) complying with following standards: ISO 813 and ASTM 429 - Method B. The grip permits to fix the metal plate. A ball joint ensures the perpendicularity between the metal plate and the free end of the rubber strip during the test.
Note: a standard grip is required for clamping the free end of the rubber strip.

8-DM2-00-000-0 - ROLLING GRIP FOR PEELING TEST

Rolling support for peeling test on rigid materials. The rigid specimen moves under the rollers and the layer to be separated is passed between the rollers and pulled by the top clamp.
Maximum specimen width: 90 mm
Maximum specimen thickness: 40 mm
Application: The terminal is ideal for peeling testing on multi-layer materials and rigid samples.

8-DM4-00-000-0 - 90° PEEL STRENGHT FIXTURE

Self-adjusting sliding bed for 90° peel tests. The test plate moves horizontally during the test in order to maintain a 90° peel angle.
The standard test plate supplied is made of stainless steel. Plates made of other materials can be alternatively used.

8-DM9-00-000-0 - SPIRAL SHAPE GRIPS FOR WIRE TEST

Couple of Involute-shaped grips for tests on wires. The sample is wrapped around the bollard and the free end is clamped firmly using a screw operated vice.
The grips are ideal for the tensile testing of wires, small pipes or cable sheath.

8-D13-00-000-0 - GRIPS FOR TRACTION RELAXATION

Grips for Traction relaxation test according to EN 681-1 standard.
The grip makes it possible to elongate the sample using the tensile tester, lock the sample in the extended position and test the relaxation of the force which has occurred after aging using the tensile tester. The sample holder can be removed from the tensile tester and can be placed in an oven up to 70°C.

8-D14-00-000-0 - GRIP COMPRESS.RELAXATION TEST ISO 3384-B

Grips for Compression relaxation test in compliance with ISO 3384 method B.
The grip makes it possible to:
- apply to the sample the required deformation using the tensile tester,
- lock the sample in the deformated position,
- place the sample holder in a stove for aging
- test the relaxation of the force which has occurred using the tensile tester


.	Gibitre Instruments Company Rubber testing Plastic testing Software Services Contacts News Distributors Links Customers Area Languages Home	Rubber Testing Rheology Hardness Testing Phisical Characteristics Applicative Characteristics Sample Preparing Hardness Testing Phisical Characteristics Applicative Characteristics Sample Preparing	Phisical Characteristics Rheometers Viscometers Volumetric Cutter Film for Rheology tests Shore Testers Micro IRHD Testers IRHD Testers Multi Unit Hardness Testers Hardness + Density Tester Samples for Hardness Tensile Testers Density Testers Resistivity Tester Rebound Tester Tr - Brittleness Point Tester Compression Set Abrasion Testers Fatigue Tester Ozone Cabinets Flammability Resistance Accelerated Aging Laboratory Presses Accelerated Aging Sample Cutting Machines Splitting Machine Hardness Testers Mechanical Characteristics Density Testers Tr - Brittleness Point Tester Flammability Resistance Accelerated Aging Laboratory Presses Sample Cutting Machines Splitting Machine	Tensile Testers Moving Die Rheometer (MD) Oscillating Disk Rheometer(OD) Mooney Viscometer Processability Tester-MD Volumetric Cutting Machine Film for MD Rheometer Film for Mooney Viscometer Automatic Shore Tester Pc Automatic Shore Tester Console Manual Digital Shore Tester Certified Shore A Samples Automatic Micro IRHD - Pc Automatic Micro IRHD - Console Micro IRHD - Laser Centring Manual Centring Tools Certified Micro IRHD Samples Automatic IRHD - Pc Automatic IRHD - Console Certified IRHD Samples Multi-Unit Hardness Tester Autom.Density+Hardness Tester Certified Shore A Samples Certified Shore D Samples Certified IRHD Samples Certified Micro IRHD Samples Tensile tester Grips for Tensile Tester Autom. Density Tester - Pc Autom.Density Tester - Console Rapid Density Tester Resistivity Tester Rebound Tester Low Temperature Check Compression Set Regulable Compression Set Deformability Test PV 3307 Compression Set PV 3330 Abrasion tester Abrasion tester for hoses De Mattia Fatigue Tester Fatigue Tester + Therm.Chamber Ozone Cabinet Ozone cabinet + Humid.Control Flammability Tester Block Oven Laboratory Press Lab Press with Cooling cyrcuit Lab Press with Pressure contr. Pneumatic table-top Press Moulds for Presses Block Oven Volumetric Sample Cutter Manual die Cutting Cutters Rubber Splitting Machine Automatic Shore Tester - Pc Automatic Shore Tester-Console Certified Shore D Samples Manual Digital Shore Tester Tensile tester Grips for Tensile Tester Autom. Density Tester - Pc Autom.Density Tester - Console Rapid Density Tester Low Temperature Check Flammability Tester Block Oven Laboratory Press Lab Press with Cooling cyrcuit Lab Press with Pressure contr. Pneumatic table-top Press Moulds for Presses Manual die Cutting Cutters Splitting Machine	.

© Gibitre Instruments P.IVA IT02827900164 Web Design Optimist	Grips for Tensile Tester 8-D15-00-000-0 - PNEUMATIC GRIPS (CLOSURE FORCE 2000 N) Couple of pneumatically actuated vice grip with tightening closure regulation and maximum closure force 2000 N. The grips are provided with standard jaws. A range of optional cross cut, plain and rubber jaw faces are available. Maximum sample width: 80 mm Maximum sample thickness: 14 mm Maximum closure force: 2000 N Application: General purpose grips for tensile testing of rubber, plastics, textiles and other materials where self-tightening is required. 8-D15-21-000-0 - OPTIONAL JAWS FOR PNEUMATIC GRIPS 2000N N° 4 jaw faces with rubber covering for pneumatic grips (2000 N closure force) 8-D15-23-000-0 - OPTIONAL JAWS FOR PNEUMATIC GRIPS 2000N N° 4 jaw faces for pneumatic grips (2000 N closure force) with diamond serrated finishing 8-D15-22-000-0 - OPTIONAL JAWS FOR PNEUMATIC GRIPS 2000N N° 4 jaw faces for pneumatic grips (2000 N closure force) with fine V-serrated finishing 8-DM5-00-000-0 - PNEUMATIC GRIPS (CLOSURE FORCE 600 N) Couple of pneumatically actuated vice grip with tightening closure regulation and maximum closure force 600 N. The grips are provided with standard jaws. A range of optional cross cut, plain and rubber jaw faces are available. Maximum sample width: 35 mm Maximum sample thickness: 10 mm Maximum closure force: 600 N Application: General purpose grips for tensile testing of rubber, plastics, textiles and other materials where self-tightening is required. 8-DM5-10-000-0 - OPTION JAWS WITH FOR SMALL PNEUM. GRIPS N° 4 rubber covered jaw faces for Pneumatic Grips with closure force 600 N 8-DM3-00-000-0 - PNEUMATIC SLIDING WEDGE GRIPS - 10 kN Couple of pneumatically operated sliding wedge grips with tightening closure regulation and maximum closure force 10 kN. The grips are provided with standard jaws. Optional cross cut or plain jaw faces are available. Maximum sample width: 32 mm Maximum sample thickness: 9 mm Maximum closure force: 10 kN Application: tensile testing of plastics and composite materials where self-tightening is required. 8-D11-00-000-0 - BOLLARD GRIPS FOR WIRES WITH PNEUM.CLAMP Couple of Bollard grip with pneumatic camp for metal wire, yarns and threads. The sample is wrapped around the bollard and the free end clamped firmly using a pneumatic clamp. Grip stresses in the specimen are distributed in the material in contact with the bollard circumference. Diameter of the Bollard: 78 mm Application: tensile testing of high resistance wire, yarns and threads 8-D29-00-000-0 - GRIPS FOR TRACTION TEST ON LITTLE HOSES Pneumatic grip for traction test on small diameter rubber hoses. The grip is ideal for the testing of hoses with high elongation and low tear resistance. 8-DM1-00-000-0 - SELF TIGHTENING MANUAL GRIPS Couple of Eccentric Roller Grips - 25 mm wide General purpose self-tightening grips ideal for dumbbell and flat specimens. The roller operates using a basic cam jamming principle. The rollers have a fine serrated finish that helps to prevent slipping. Maximum sample width: 30 mm. Maximum sample thickness: 5 mm (0.2 in). Capacity: 1 kN Applications: Ideal for tensile testing sheet materials including polymers and rubber. 8-D32-00-000-0 - SELF TIGHTENING SLIDING WEDGE GRIPS Couple of general purpose manually operated self-tightening sliding wedge grips. The grips are provided with serrated jaw faces. Maximum sample width: 32 mm. Maximum sample thickness 9 mm. Maximum closure force: 10 kN Application: tensile testing of plastics and composite materials where self-tightening is required. 8-D17-00-000-0 - MANUAL VICE ACTION GRIPS Couple of manual operated vice action grips. The jaws for the grips (not included ) must be selected among the available models. Maximum sample width: 55 mm Maximum sample thickness: 10 mm Maximum closure force: 5 kN Application: tensile test of rubber, leather, textiles. 8-D17-12-000-0 - JAWS FOR MANUAL GRIPS (V SERRATED) N° 4 jaw faces for Manual linear grips (Fine V-serrated) 8-D17-11-000-0 - JAWS FOR MANUAL GRIPS (DIAMOND SERRATED) N° 4 Jaw faces for Manual linear grips with Diamond serrated (crossed V-serrated) finishing. 8-D17-10-000-0 - JAWS FOR MANUAL GRIPS (WAVE-SHAPED) N° 4 wave-shaped jaw faces for Manual linear grips 8-D35-00-000-0 - SELF-TIGHTENING BOLLARD GRIPS Couple of self-tightening bollard grips. The sample is mounted over the bollard and positioned between the bollard and the grip shank. The fine serrated finishing of the parts in contact with the sample helps to prevent slippage. Maximum sample width: 30 mm Maximum sample thickness: 10 mm Capacity: 1 kN Application: tensile testing of textile, rubber pipes, etc. 8-D10-00-000-0 - PLATENS FOR COMPRESSION TESTS Couple of circular platens for compression tests with 120 mm diameter. The lower platen is fitted with ball joint to ensure parallelism between the planes during the test. 8-D20-00-000-0 - RECTANGULAR COMPRESSION PLATENS Couple of rectangular platens for compression tests with dimensions 220x100 mm. The upper platen is fitted with articulated joint to ensure parallelism between the planes during the test. Application: compression Tests on corrugated pipes according to EN 50086-2-4. Compression tests on foam and expanded products. 8-D21-00-000-0 - GRIPS FOR BENDING TEST Grips for three points-bending-tests according to ISO 178 and ASTM D 790 standards. The lower grip permits to set the distance between the contact points. Maximum distance of the contact points: 140 mm Maximum sample width: 30 mm 8-D28-00-000-0 - GRIPS FOR TEXTILE BAND Couple of grips for textile band traction test. Maximum sample width 180 mm. 8-DM8-0N-000-0 - ROTATING GRIPS FOR TEST OF ISO 37-A RING Couple of rotating grips for the tensile testing of ISO 37-Type A Rings. A chain driven system permits to rotate the upper grip during the test according to the requirements of the standard. Application: the grips permit can be used for the performance of tensile tests on rings according to ISO-37 type A or for the tensile testing of O-Rings according to ASTM D 1414. The grips are ideal for the execution of tensile tests with thermal chamber because the measure of elongation does not require extensometers. Note: Pulleys with non standard diameter for the testing of finished products can be optionally supplied. 8-DM8-0Q-000-0 - ROTATING GRIPS FOR TEST OF ISO 37-B RING Couple of rotating grips for the tensile testing of ISO 37-Type B Rings. A chain driven system permits to rotate the upper grip during the test according to the requirements of the standard. Application: the grips permit can be used for the performance of tensile tests on rings according to ISO-37 type B or for the tensile testing of O-Rings according to ASTM D 1414. The grips are ideal for the execution of tensile tests with thermal chamber because the measure of elongation does not require extensometers. Note: pulleys with non standard diameter for the testing of finished products can be optionally supplied. 8-D12-00-000-0 - GRIP FOR ISO 813 TEST (90° PEEL) Grip for determination of adhesion to a rigid substrate (90° peel method) complying with following standards: ISO 813 and ASTM 429 - Method B. The grip permits to fix the metal plate. A ball joint ensures the perpendicularity between the metal plate and the free end of the rubber strip during the test. Note: a standard grip is required for clamping the free end of the rubber strip. 8-DM2-00-000-0 - ROLLING GRIP FOR PEELING TEST Rolling support for peeling test on rigid materials. The rigid specimen moves under the rollers and the layer to be separated is passed between the rollers and pulled by the top clamp. Maximum specimen width: 90 mm Maximum specimen thickness: 40 mm Application: The terminal is ideal for peeling testing on multi-layer materials and rigid samples. 8-DM4-00-000-0 - 90° PEEL STRENGHT FIXTURE Self-adjusting sliding bed for 90° peel tests. The test plate moves horizontally during the test in order to maintain a 90° peel angle. The standard test plate supplied is made of stainless steel. Plates made of other materials can be alternatively used. 8-DM9-00-000-0 - SPIRAL SHAPE GRIPS FOR WIRE TEST Couple of Involute-shaped grips for tests on wires. The sample is wrapped around the bollard and the free end is clamped firmly using a screw operated vice. The grips are ideal for the tensile testing of wires, small pipes or cable sheath. 8-D13-00-000-0 - GRIPS FOR TRACTION RELAXATION Grips for Traction relaxation test according to EN 681-1 standard. The grip makes it possible to elongate the sample using the tensile tester, lock the sample in the extended position and test the relaxation of the force which has occurred after aging using the tensile tester. The sample holder can be removed from the tensile tester and can be placed in an oven up to 70°C. 8-D14-00-000-0 - GRIP COMPRESS.RELAXATION TEST ISO 3384-B Grips for Compression relaxation test in compliance with ISO 3384 method B. The grip makes it possible to: - apply to the sample the required deformation using the tensile tester, - lock the sample in the deformated position, - place the sample holder in a stove for aging - test the relaxation of the force which has occurred using the tensile tester
	.	.	.	.	.